Product
Overview
Graphic
Technical
Configuration
Related
Product
- Overview
- Graphic
- Technical
- Configuration
- Related
-
Product OverviewMT-1C magnetic particle flaw detector adopts high-capacity lithium battery pack, can convert DC to AC through variable-frequency, provide magnetic powder flaw detector with magnetic power supply. With low power consumption, it can continuous work for more than four hours after charging. It is especially proper for working in the wild and aerial area.
Function & applicationIt is widely used in the industry of aircraft manufacturing, boiler and pressure vessel, electric, oil field, shipbuilding, turbine and combustion engine parts, mine, machinery, standard parts, oil pump, vehicle parts, bridging, chemical, railway, large mechanical components, steel structure equipment etc. It mainly detects the surface detection of forging, quenching, welding, fatigue, for example, irregular workpiece of chain, crankshaft, bearing, high strength bolt, spring, forging, petrochemical pipe, valve, vane, gear, anchor chain, welding seam etc.Working PrinciplePut the workpiece into high-intensity magnetic field, connect electric to make it magnetized, if there are flaws (crack,slag) in or near the surface, there will be a leakage around the flaws. Put good quality magnetic powder(usually the magnetic iron oxide powder)on the object, magnetic powder will gather together near the leaked magnetic field, piled up to form visible traces of magnetic powder. In the proper light, we can see the marks and judge the position, size, shape and degree of the flaws.Working ConditionsOperatiom temperature: －10℃～＋40℃
Storage temperature: -20℃～＋70℃Relative Humidity: ≤80％
The environment should avoid strong vibration, magnetic interference, corrosive medium and heavy dust.Instrument Featuresl Portable high-capacity lithium battery pack without limitation of 220V power supply. With low power consumption and small volume, charging either online or offline. It is especially proper for working in the wild and aerial area.
l Adjustable illumination brightness and working power can meet different testing demand and save the setting.
l New power supply can enhance the testing depth and sensitivity.
l Pulse power supply can continuous work without chill time.
l Combine all traditional advantages in one unit can detect surface flaws fast, clearly and accurately.
l Adjustable brightness, power and range can meet different demand.
l Small size with equipped bag can improve working efficiency.
Operating Method and AttentionsConnect the line with detector, start the detector, press detection, choose proper polar distance according to the workpiece.
l When making dry powder detection, put the powder on the workpiece, move the yoke with 40mm/s, make sure they are well connected, observe whether the powder is pile up.
l When detecting, there must be overlap, the overlap area should less than 25mm, judge the marks correctly.
l If the pile up is appeared, blow the redundant powder, make the mark clear.
l If the mark can’t be judged, you should polish the surface and test again; if the mark is flaw, press confirm to capture the photo.
Instrument Maintenancel Use soft cloth to clean the detector.
l Avoid strong vibration, place in dry area.
l When not using for a long time, you should charge it every three months to avoid damping the components.
l Do not press the key too hard or use metal to knock it.
l After turning off the detector for 5s, boot again, do not boot immediately.
-
-
Lighting White/Fluorescent Dimension 204mm×100mm×36mm Main unit 0.75 kg Screen dimension 3.2 inch Working voltage DC 15v-21v Output curve AC current wave Probe dimension 174mm×162mm×38mm Polar distance 75-200mm Yoke weight 1.5kg(including line) Cable line length 1.2m（as you required) Lifting force ＞45N（no less than 5KG) Complex sensitivity Notch clear on A1 15/100 standard specimen Continuous working hours ＞4 hours Battery dimension 79mm×58mm×18mm Li-battery weight 0.52kg Battery voltage 18v Battery capacity 8400mAh Charging limited voltage 21v Power supply 220v 50Hz White light illumination ＞1000lx Distance between light and workpiece 365nm100mm Fluorescence center wavelength 365nm Fluorescence amplitude ＞1000μw/cm2 -
Magnetic powder detector ABS box
MITECH portable Leeb hardness tester box, length: 35.5cm; width: 19cm; high: 11cm; weight: 1.5kg. It is made of ABS plastic, which is waterproof and resistant to shock. It has excellent heat resistance, low temperature resistance and so on. It can effectively protect the oil, dust and various kinds of corrosion in harsh environment. The box size is in line with aviation, (Can be placed under the seat and luggage rack), safe, reliable and stable.
Magnetic flaw detector electromagnetic yoke MITECH Portable Magnetic Flaw Detector Electromagnetic Yoke，Size: 174mm * 162mm * 38mm, Electromagnetic yoke distance: 75-200mm, Electromagnetic yoke Weight: 1.5kg.The use of pulsating power supply technology, continuous uninterrupted work, from the traditional electromagnetic yoke must be the gap time limit. At the same time lighting brightness, power, yoke spacing adjustable to meet your needs of different measurement conditions.
Magnetic flaw detector electromagnetic yoke cable line MITECH magnetic flaw detector electromagnetic yoke cable line.Length: 1 m (OEM), mainly used to connect portable magnetic detector and electromagnetic yoke, accurate transmission of measurement signals to ensure the accuracy of measurement results. 
AC adapter Change alternative current into direct current, protect the circuit
-
Magnetic powder detector leather pockets and belts MITECH magnetic detectors pockets and belts, portable compact, the operator can tilt the instrument across the waist, greatly reducing the labor intensity of the flaws, improve work efficiency, especially for the field, high altitude testing and other special occasions flaw detection. 
Magnetic powder detector yoke movable support For the electromagnetic yoke probe adjustment, to meet the special workpiece measurement, improve the measurement accuracy.
郵箱反饋
如您在和我公司的交往中遇到問題，可通過以下方式和我們?nèi)〉寐?lián)系！
您也可以撥打我們客戶服務熱線：400-0600-280
